top of page

Broken Chains Inc Group

Public·64 members
Joe Onofrio
Joe Onofrio

How to Download and Install Kbar Flybarless Setup Software



```markdown


How to Download and Install Kbar Flybarless Setup Software




If you are looking for a way to configure and tune your flybarless helicopter system, you might want to try the Kbar flybarless setup software. This software is compatible with various Kbar gyro models, such as the Kbar Mini V2, the Kbar V2 5.3.4 Pro, and the Kbar K8. It allows you to adjust the parameters of your flybarless system, such as the servo type, the swashplate type, the tail gyro gain, and the cyclic and collective pitch. You can also perform firmware updates and backup your settings.




kbar flybarless setup software download



In this article, we will show you how to download and install the Kbar flybarless setup software on your Windows PC. You will need a USB cable to connect your Kbar gyro to your computer. You will also need an internet connection to download the software and the drivers.


Step 1: Download the Kbar Flybarless Setup Software




The first step is to download the Kbar flybarless setup software from the official website. You can find the download link here. The software is available in English, Chinese, and German languages. Choose the language that suits you best and click on the download button.


The software is a zip file that contains two files: a setup.exe file and a readme.txt file. Save the zip file to your computer and extract it to a folder of your choice.


Step 2: Install the Kbar Flybarless Setup Software




The next step is to install the Kbar flybarless setup software on your computer. To do this, double-click on the setup.exe file that you extracted from the zip file. A window will pop up asking you to choose a language for the installation. Select your preferred language and click OK.


Then, follow the instructions on the screen to complete the installation process. You will need to accept the license agreement, choose a destination folder, and create a shortcut on your desktop. The installation should take only a few minutes.


Step 3: Install the Drivers for Your Kbar Gyro




The last step is to install the drivers for your Kbar gyro. These drivers are necessary for your computer to recognize your Kbar gyro when you connect it via USB. To install the drivers, you will need to connect your Kbar gyro to your computer using a USB cable.


Once you connect your Kbar gyro, your computer should automatically detect it and install the drivers. You can check if the drivers are installed correctly by going to Device Manager and looking for a device named "KBar" under "Ports (COM & LPT)". If you see this device, it means that your drivers are installed successfully.


If you don't see this device, it means that your drivers are not installed properly. In this case, you will need to manually install them using the driver files that are included in the zip file that you downloaded earlier. To do this, follow these steps:


  • Go to Device Manager and look for a device named "Unknown Device" or "USB Serial Device" under "Other Devices". This is your Kbar gyro.



  • Right-click on this device and select "Update Driver Software".



  • Select "Browse my computer for driver software".



  • Select "Let me pick from a list of device drivers on my computer".



  • Select "Have Disk".



  • Browse to the folder where you extracted the zip file and select the driver file that matches your operating system (32-bit or 64-bit).



  • Click OK and follow the instructions on the screen to install the driver.



After installing the driver, you should see a device named "KBar" under "Ports (COM & LPT)" in Device Manager.


Conclusion




Congratulations! You have successfully downloaded and installed the Kbar flybarless setup software on your computer. You can now launch the software from your desktop shortcut or from the Start menu and start configuring e0e6b7cb5c


About

Welcome to the group! You can connect with other members, ge...

Members

Group Page: Groups_SingleGroup
bottom of page